Here's how it works

The hose attached to the housing is clamped by a roller located on the rotor. The rotating movement of the rotor makes the clamping point move to the desired conveying direction, conveying medium. The roller squeezes the medium through the hose in the pump head, causing the hose to unload again. The rearranged hose creates low pressure, drawing fresh media into the hose.

By increasing the rotor speed, the throughput can be increased in a straight line.

Scope of application

Sewage purification: Measure high viscosity medium/polymer solution

Drinking water treatment: Measure disinfectants

Food industry: shear sensitive media, aromatics, additives

Paper industry: Measurement of additives

Cooling cycle: Metering of anti-corrosive and anti-microbial agents

Plastics production: Measurement of additives

Under normal circumstances: the power does not exceed 410 l/h chemical measurement